机智云»社区首页 › 开源项目及赛事 › 其他单片机 › 从0开始玩转Gokit3 SOC（3）温湿度远程监控应用-数值量 ...

从0开始玩转Gokit3 SOC（3）温湿度远程监控应用-数值量上报

查看数: 169393 | 评论数: 178 | 收藏 4

关灯 | 提示：支持键盘翻页<-左右->

帖子模式

bigfanofloT

发布时间: 2017-1-4 19:08

正文摘要:

replyreload += ',' + 18474; 本帖最后由 bigfanofloT 于 2017-1-4 19:12 编辑本应用基于机智云gokit3 SOC硬件平台，演示了如何通过通过板载DHT11温湿度传感器感知温湿度，然后上报到云端，从而可在手机APP端监控 ...

智能小鸟 发表于 2017-1-5 14:12:18

过来看看，支持一下！！！

logive 发表于 2017-10-9 03:31:36

bigfanofloT 发表于 2017-10-1 17:13
把你的发上来看看

这个就是系统自动生成的新代码，未按照该贴编辑前可以编译，按照该贴修改以后报错无法编译，谢谢。

/**
****************************************
* @file       user_main.c
* @brief       The program entry file
* @author    Gizwits
* @date       2017-07-19
* @version    V03030000
* @copyright Gizwits
*
* @note       机智云.只为智能硬件而生
*             Gizwits Smart Cloud  for Smart Products
*             链接|增值ֵ|开放|中立|安全|自有|自由|生态
*             www.gizwits.com
*
****************************************/
#include "ets_sys.h"
#include "osapi.h"
#include "user_interface.h"
#include "gagent_soc.h"
#include "user_devicefind.h"
#include "user_webserver.h"
#include "gizwits_product.h"
#include "driver/hal_key.h"
#if ESP_PLATFORM
#include "user_esp_platform.h"
#endif

#ifdef SERVER_SSL_ENABLE
#include "ssl/cert.h"
#include "ssl/private_key.h"
#else
#ifdef CLIENT_SSL_ENABLE
unsigned char *default_certificate;
unsigned int default_certificate_len = 0;
unsigned char *default_private_key;
unsigned int default_private_key_len = 0;
#endif
#endif

/**@name User timers related parameters
* @{
*/
#define USER_TIME_MS 1000                                                 ///< Timing time in milliseconds
LOCAL os_timer_t userTimer;                                              ///< User timer structure
/**@} */

/**@name Key related definitions
* @{
*/
#define GPIO_KEY_NUM                         2                         ///< Defines the total number of key members
#define KEY_0_IO_MUX                         PERIPHS_IO_MUX_GPIO0_U    ///< ESP8266 GPIO function
#define KEY_0_IO_NUM                         0                         ///< ESP8266 GPIO number
#define KEY_0_IO_FUNC                         FUNC_GPIO0                ///< ESP8266 GPIO name
#define KEY_1_IO_MUX                         PERIPHS_IO_MUX_MTMS_U    ///< ESP8266 GPIO function
#define KEY_1_IO_NUM                         14                         ///< ESP8266 GPIO number
#define KEY_1_IO_FUNC                         FUNC_GPIO14                ///< ESP8266 GPIO name
LOCAL key_typedef_t * singleKey[GPIO_KEY_NUM];                            ///< Defines a single key member array pointer
LOCAL keys_typedef_t keys;                                                 ///< Defines the overall key module structure pointer
/**@} */

/**
* Key1 key short press processing
* @param none
* @return none
*/
LOCAL void ICACHE_FLASH_ATTR key1ShortPress(void)
{
GIZWITS_LOG("#### KEY1 short press ,Production Mode\n");

gizwitsSetMode(WIFI_PRODUCTION_TEST);
}

/**
* Key1 key presses a long press
* @param none
* @return none
*/
LOCAL void ICACHE_FLASH_ATTR key1LongPress(void)
{
GIZWITS_LOG("#### key1 long press, default setup\n");

gizwitsSetMode(WIFI_RESET_MODE);
}

/**
* Key2 key to short press processing
* @param none
* @return none
*/
LOCAL void ICACHE_FLASH_ATTR key2ShortPress(void)
{
GIZWITS_LOG("#### key2 short press, soft ap mode \n");

gizwitsSetMode(WIFI_SOFTAP_MODE);
}

/**
* Key2 button long press
* @param none
* @return none
*/
LOCAL void ICACHE_FLASH_ATTR key2LongPress(void)
{
GIZWITS_LOG("#### key2 long press, airlink mode\n");

gizwitsSetMode(WIFI_AIRLINK_MODE);
}

/**
* Key to initialize
* @param none
* @return none
*/
LOCAL void ICACHE_FLASH_ATTR keyInit(void)
{
singleKey[0] = keyInitOne(KEY_0_IO_NUM, KEY_0_IO_MUX, KEY_0_IO_FUNC,
                              key1LongPress, key1ShortPress);
singleKey[1] = keyInitOne(KEY_1_IO_NUM, KEY_1_IO_MUX, KEY_1_IO_FUNC,
                              key2LongPress, key2ShortPress);
keys.singleKey = singleKey;
keyParaInit(&keys);
}

/**
* @brief user_rf_cal_sector_set

* Use the 636 sector (2544k ~ 2548k) in flash to store the RF_CAL parameter
* @param none
* @return none
*/
uint32_t ICACHE_FLASH_ATTR user_rf_cal_sector_set()
{
return 636;
}

/**
* @brief program entry function

* In the function to complete the user-related initialization
* @param none
* @return none
*/
void ICACHE_FLASH_ATTR user_init(void)
{
uint32_t system_free_size = 0;

wifi_station_set_auto_connect(1);
wifi_set_sleep_type(NONE_SLEEP_T);//set none sleep mode
espconn_tcp_set_max_con(10);
uart_init_3(9600,115200);
UART_SetPrintPort(1);
GIZWITS_LOG( "---------------SDK version:%s--------------\n", system_get_sdk_version());
GIZWITS_LOG( "system_get_free_heap_size=%d\n",system_get_free_heap_size());

struct rst_info *rtc_info = system_get_rst_info();
GIZWITS_LOG( "reset reason: %x\n", rtc_info->reason);
if (rtc_info->reason == REASON_WDT_RST ||
      rtc_info->reason == REASON_EXCEPTION_RST ||
      rtc_info->reason == REASON_SOFT_WDT_RST)
{
      if (rtc_info->reason == REASON_EXCEPTION_RST)
      {
         GIZWITS_LOG("Fatal exception (%d):\n", rtc_info->exccause);
      }
      GIZWITS_LOG( "epc1=0x%08x, epc2=0x%08x, epc3=0x%08x, excvaddr=0x%08x, depc=0x%08x\n",
            rtc_info->epc1, rtc_info->epc2, rtc_info->epc3, rtc_info->excvaddr, rtc_info->depc);
}

if (system_upgrade_userbin_check() == UPGRADE_FW_BIN1)
{
      GIZWITS_LOG( "---UPGRADE_FW_BIN1---\n");
}
else if (system_upgrade_userbin_check() == UPGRADE_FW_BIN2)
{
      GIZWITS_LOG( "---UPGRADE_FW_BIN2---\n");
}

keyInit();

userInit();

gizwitsInit();

//user timer
os_timer_disarm(&userTimer);
os_timer_setfn(&userTimer, (os_timer_func_t *)userHandle, NULL);
os_timer_arm(&userTimer, USER_TIME_MS, 1);

GIZWITS_LOG("--- system_free_size = %d ---\n", system_get_free_heap_size());
}

logive 发表于 2017-10-9 03:35:51

bigfanofloT 发表于 2017-10-1 17:13
把你的发上来看看

gen_misc.sh version 20150511

boot mode: new
app:1
spi speed: 40 MHz
spi mode: QIO
spi_size_map:6
make[1]: Entering directory '/home/cobetckoe/workspace/logive/app/user'
DEPEND: xtensa-lx106-elf-gcc -M -Os -g -Wpointer-arith -Wundef -Wl,-EL -fno-inline-functions -nostdlib -mlongcalls -mtext-section-literals -ffunction-sections -fdata-sections -DICACHE_FLASH -I include -I ./ -I ../../include/ets -I ../include -I ../../include -I ../../include/eagle -I ../..//app/gagent/inc -I ../..//app/Gizwits -I ../..//app/Utils user_json.c
/bin/sh: 2: cannot create .output/eagle/debug/obj/user_json.d.26294: Permission denied
DEPEND: xtensa-lx106-elf-gcc -M -Os -g -Wpointer-arith -Wundef -Wl,-EL -fno-inline-functions -nostdlib -mlongcalls -mtext-section-literals -ffunction-sections -fdata-sections -DICACHE_FLASH -I include -I ./ -I ../../include/ets -I ../include -I ../../include -I ../../include/eagle -I ../..//app/gagent/inc -I ../..//app/Gizwits -I ../..//app/Utils user_main.c
/bin/sh: 2: cannot create .output/eagle/debug/obj/user_main.d.26299: Permission denied
xtensa-lx106-elf-gcc -Os -g -Wpointer-arith -Wundef -Wl,-EL -fno-inline-functions -nostdlib -mlongcalls -mtext-section-literals -ffunction-sections -fdata-sections -DICACHE_FLASH -I include -I ./ -I ../../include/ets -I ../include  -I ../../include -I ../../include/eagle -I ../..//app/gagent/inc -I ../..//app/Gizwits -I ../..//app/Utils  -o .output/eagle/debug/obj/user_main.o -c user_main.c
user_main.c: In function 'user_rf_cal_sector_set':
user_main.c:152:30: error: 'dataPoint_t' has no member named 'valuetemp'
            currentDataPoint.valuetemp = curTemperature;
                           ^
user_main.c:153:30: error: 'dataPoint_t' has no member named 'valuehum'
            currentDataPoint.valuehum = curHumidity;
                           ^
../../Makefile:321: recipe for target '.output/eagle/debug/obj/user_main.o' failed
make[1]: ** [.output/eagle/debug/obj/user_main.o] Error 1
make[1]: Leaving directory '/home/cobetckoe/workspace/logive/app/user'
../Makefile:307: recipe for target '.subdirs' failed
make: ** [.subdirs] Error 2

kljie1000 发表于 2024-4-9 12:40:56