8266的SOC方案，手机点击下发过快时候会导致8266重启。。。
本帖最后由 情愫夏天 于 2018-6-13 23:50 编辑昨晚在新建数据点后，MCU开发选择8266的soc方案，现在已经成功烧录到8266并且成功运行，但是当手机快速下发时候，设备会重启，打印见下面的黑色加粗字体信息！
在以前的自动生成的代码里面，是没有这情况的！！
型号：8266-12e32Mbit
工程固件版本信息：
<p>/**
* MCU software version number
*/
#define SOFTWARE_VERSION "03030000"</p><p>/**
* MCU hardware version number
*/
#define HARDWARE_VERSION "03000001"</p><p> </p>串口打印信息：
~~~issued data: send_packet len=70
Add data to send buffer list,waiting to be sent.destPd:1
Need to send bufCount = 5
gagentDataReceived exit
CLOUD_DATA_IN cmd : 0093
1.gagentDataReceived from Cloud len=76 addr:0x3fff8270 pos:0x3fff81a8
2.gagentDataReceived from Cloud len=76 addr:0x3fff8270 pos:0x3fff81a8
[
014768] gagentDataReceived msg Cloud did:HdaT948DmCYrDQ2nJLSi4A szClientid:usruVj8WUHokaPEAqd3QGtj
~~~gizIssuedProcess: did is NULL .
~~~issued data: send_packet len=70
Add data to send buffer list,waiting to be sent.destPd:1
Need to send bufCount = 6
gagentDataReceived exit
CLO%謧!匇1)=羰乍仂)> H9鼈,>
x┅┅┅┅┅┅iE-乿ersion:2.0.0(5a875ba)--------------
system_get_free_heap_size=33272
reset reason: 3
epc1=0x40101ac0, epc2=0x00000000, epc3=0x00000000, excvaddr=0x00000000, depc=0x00000000
---UPGRADE_FW_BIN1---
gpio_name 14
gpio_name 12
gpio_name 13
gagentAuthInit : start ...
Get gagent config data from master eare.
Save gagent config data
GAgent SOC had did don't need to get authkey!!!
gagentAuthInit :
end ...
devAuthResultCb result=0
Domain:api.gizwits.com:80.
tz in sec:28800,timezone:8.0
你把完整日志保存txt上传上来帖子。如果手机1秒下发控制4/5次甚至更频繁给8266，会造成WiFi模块重启
页:
[1]