请问一下为什么我的8266只有在连接机智云串口助手才能正常工作
我的8266 12F 用机智云串口助手调试的时候 APP设备在线，一切正常。就是当直接上电的时候 虽然连上了路由器 但是APP里面的设备却没有上线。也用手机热点和demo APP试过了 也是一样 自己迟迟不能解决 还望大佬解答一下 附一个通讯模组调试日志不知道有没有帮助https://wx2.sinaimg.cn/mw1024/7846849fgy1g2feeikiqkj20gf08dt8v.jpg ---UPGRADE_FW_BIN1---gagentAuthInit : start ...
Get gagent config data from master eare.
Save gagent config data
GAgetn Stander had did don't need to get authkey!!!
gagentAuthInit : end ...
sizeof(pgContextData->gc.Ursvd.rsvd_st) : 244 result=0.
Domain:api.gizwits.com:80.
tz in sec:28800,timezone:8.0
In Station mode
SSID:GB2312,KEY:30444444
Wifi station connect failed!
NWK_WIFI_STA_UP
uart sendLen:9 ok.
GAgent_LocalInit OK!
lanOTAInit ...... ok
GAgent lib Time:Jun9 2018 14:47:38
GAgent Start...
----------------------------------------- GAGENT INFO --------------------------------------
GAgent Work in GAGENT_STANDARD.
GAgent Product Soft Version: 04020034. Hard Version: 00ESP826
GAgent Compiled Time: Jun9 2018, 14:47:49.
GAgent cache first ssid GB2312.
GAgent backup ssid GB2312.
GAgent mac :84F3EB73FE9B
GAgent authKey : GAgent passcodelen:10 : SN****CP
GAgent did : 37fGa*********osHM
GAgent old passcode: NULL
GAgent old_did: NULL
GAgent old pk :662bb49aa649432e939c64fdcea8bf0e len:32
GAgent AP name:XPG-GAgent-FE9B
GAgent 3rd cloud :
GAgent M2M Host :sandbox.gizwits.com , IP :203.195.142.207
GAgent Default GServer Host :api.gizwits.com port:80
GAgent GService Host :api.gizwits.com , Port :0 , IP :139.199.92.156
GAgent BizLogLev:00,SysLogLev:00
GAgent MCU Protocol Vertion:.
GAgent MCU P0 Vertion:.
GAgent MCU Hard Vertion:.
GAgent MCU Soft Vertion:.
GAgent WeChat Device Type: gh_35****ab57
Flash Size:FLASH_SIZE_32Mbit .
--------------------------------------------------------------------------------------
mode : sta(84:f3:eb:73:fe:9b)
add if0
gagentNwkEventCB event: 0x0004
GAgentStatus change, lastGAgentStatus:0x0000, newGAgentStatus:0x0002
Local send list node cnt 1
Local is busy,will be sent for a while
haiNwkStatus: 0x000A, gagentStatus: 0x0002
BaudRate : 9600
uart sendLen:9 ok.
Local_UartRx_Timer resendTime = 1
BaudRate : 9600
uart sendLen:9 ok.
Local_UartRx_Timer resendTime = 2
BaudRate : 9600
uart sendLen:9 ok.
Local_UartRx_Timer resendTime = 3
BaudRate : 9600
uart sendLen:9 ok.
Local_UartRx_Timer resendTime = 4
scandone
state: 0 -> 2 (b0)
state: 2 -> 3 (0)
state: 3 -> 5 (10)
add 0
aid 4
cnt
connected with GB2312, channel 1
dhcp client start...
connect to ssid GB2312, channel 1
BaudRate : 9600
uart sendLen:9 ok.
Local_UartRx_Timer resendTime = 5
BaudRate : 9600
uart sendLen:9 ok.
Local_UartRx_Timer resendTime = 6
ip:2.2.2.123,mask:255.255.255.0,gw:2.2.2.2
ip:2.2.2.123,mask:255.255.255.0,gw:2.2.2.2
NWK_WIFI_STA_CONNECTED
gagentNwkEventCB event: 0x0010
GAgentStatus change, lastGAgentStatus:0x0002, newGAgentStatus:0x0012
Local send list node cnt 2
Local is busy,will be sent for a while
enable bind mode, timeout time: 0.
Has ip, Connect GServer.
Save gagent config data
enable bind mode, timeout time: 0.
Cancle router connect monitor.
haiNwkStatus: 0x001A, gagentStatus: 0x001A
BaudRate : 9600
uart sendLen:9 ok.
Local_UartRx_Timer resendTime = 7
BaudRate : 9600
uart sendLen:9 ok.
Local_UartRx_Timer resendTime = 8
Scan wifi:GB2312 power. wifiRSSI: -34
SSID power:-34 level:7 wifistatus:071a
To bc airkiss config OK.
BaudRate : 9600
uart sendLen:9 ok.
Local_UartRx_Timer resendTime = 9
BaudRate : 9600
uart sendLen:9 ok.
Local_UartRx_Timer resendTime = 10
To bc airkiss config OK.
BaudRate : 9600
uart sendLen:9 ok.
Local_UartRx_Timer resendTime = 11
BaudRate : 9600
uart sendLen:9 ok.
Local_UartRx_Timer resendTime = 12
To bc airkiss config OK.
BaudRate : 9600
uart sendLen:9 ok.
Local_UartRx_Timer resendTime = 13
BaudRate : 9600
uart sendLen:9 ok.
Local_UartRx_Timer resendTime = 14
To bc airkiss config OK.
BaudRate : 9600
uart sendLen:9 ok.
Local_UartRx_Timer resendTime = 15
BaudRate : 9600
uart sendLen:9 ok.
Local_UartRx_Timer resendTime = 16
To bc airkiss config OK.
BaudRate : 9600
uart sendLen:9 ok.
Local_UartRx_Timer resendTime = 17
BaudRate : 9600
uart sendLen:9 ok.
Local_UartRx_Timer resendTime = 18
To bc airkiss config OK.
BaudRate : 9600
uart sendLen:9 ok.
Local_UartRx_Timer resendTime = 19
GAgent get local info fail ...
Please check your local data,and restart GAgent again !!
gagentDevRestart 1176 GAGENT_RESTART_DIRECT
some net err occur,do nothing !!!
Please restart GAgent !!!
state: 5 -> 0 (0)
rm 0
del if0
usl
uart sendLen:9 ok.
Local_UartRx_Timer resendTime = 20
disconnect from ssid GB2312, reason 8
NWK_WIFI_STA_DISCONNECTED
gagentNwkEventCB event: 0x0020
GAgentStatus change, lastGAgentStatus:0x0012, newGAgentStatus:0x000A
Local send list node cnt 3
Local is busy,will be sent for a while
gagentTimerDel <null> has not linked.
gagentTimerDel <null> has not linked.
haiNwkStatus: 0x000A, gagentStatus: 0x000A
@奪-nP酠 %掏 %Y+Q
蔔*9E )dP 5y NPA i籢僋*9∩ )D 5轕)LPA I蚔X-凗∩F )dP諽
NRP 権 JT p-蒦托 zB@LA
詤 +k
*7S)17宜杏蟺
P藦€*孋L! p---------------SDK version:2.0.0(5a875ba)--------------
system_get_free_heap_size=36208
reset reason: 4
Time:Jun9 2018 : 14:48:13 没有人解答嘛。。。串口日志上了。现在是WIFI会一会一会掉线的 还是没办法连上云。 可能是你烧录固件的时候出现了问题，建议重新烧录固件，而且是建议将原来出厂的固件烧进去后再烧写机智云的固件。
页:
[1]