wifi模块不断重复连接

QH_飞蓬 · 发表于 2017-3-17 00:14:05

您好，我用的是esp8266模块刷了机智云固件，用它来当做wifi模块，ESP8266模块如图

用机智云串口调试工具的模拟MCU端可以把数据上传到机智云，在机智云端可以通过查看日志可以看到，

但是通过STM32芯片的话，ESP8266模块就不断重复去连接所配置的wifi,就是一连上就断开然后又去连接，这个情况是怎么解决呢？我是用机智云自动生成的MCU代码，里面的串口，定时器，以及设备key都初始化对应的了。串口1一直打印这些日志，不清楚什么原因导致

ERROR: no memory 0
ERROR: Failed to rbWrite
ERROR: no memory 0
ERROR: Failed to rbWrite
ERROR: no memory 0
ERROR: Failed to rbWrite
ERROR: no memory 0
ERROR: Failed to rbWrite
ERROR: no memory 0
ERROR: Failed to rbWrite
ERROR: no memory 0
ERROR: Failed to rbWrite
valueTypes ChanERROR: no memory 0
ERROR: Failed to rbWrite
ERROR: no memory 0
ERROR: Failed to rbWrite
ged
valuestatus Changed
valueTimeMonth Changed
valueTimeDay Changed
valueTimeYear Changed
valueAmount Changed
valuePhone Changed
valueCardID Changed
valueRemind Changed
changed, report data
MCU2WiFi[1392:  72]: ff ff 00 44 05 00 00 00 04 05 03 0d 07 e1 00 00 00 00 00 00 00 1f 31 32 33 34 35 36 37 38 00 00 00 00 00 00 00 31 32 33 34 35 36 3ERROR: no memory 0
ERROR: Failed to rbWrite
ERROR: no memory 0
ERROR: Failed to rbWrite
7 38 00 00 00 00 00 00 00 00 00 01 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 b2ERROR: no memory 0
ERROR: Failed to rbWrite
ERROR: no memory 0
ERROR: Failed to rbWrite

ERROR: no memory 0
ERROR: Failed to rbWrite
ERROR: no memory 0
ERROR: Failed to rbWrite
ERROR: no memory 0
ERROR: Failed to rbWrite
ERROR: no memory 0
ERROR: Failed to rbWrite
Warning:gizProtocolResendData 1871 1670 0
Warning: timeout, resend data
MCU2WiFi[1955:  72]: ff ff 00 44 05 00 00 00 04 05 03 0d 07 e1 00 00 00 00 00 00 00 1f 31 32 33 34 35 36 37 38 00 00 00 00 00 00 00 31 32 33 34 35 36 37 38 00 00 00 00 00 00 00 00 00 01 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 b2
valueTypes Changed
valuestatus Changed
valueAmount Changed
changed, report data
MCU2WiFi[2320:  72]: ff ff 00 44 05 01 00 00 04 00 03 0d 07 e1 00 00 00 00 00 00 00 20 31 32 33 34 35 36 37 38 00 00 00 00 00 00 00 31 32 33 34 35 36 37 38 00 00 00 00 00 00 00 00 00 01 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 af
WarERROR: no memory 0

调了很久也不清楚原因，希望您能百忙之中抽空解答一下，非常感谢！